Pioneer VSX-1015-K - Manual (Page 11)

5 minute guide 02
11
En
Automatically setting up for
surround sound (MCACC)
The Auto MCACC Setup measures the acoustic
characteristics of your listening area, taking into account
ambient noise, speaker size and distance, and tests for
both channel delay and channel level. After you have set
up the microphone provided with your system, the
receiver uses the information from a series of test tones
to optimize the speaker settings and equalization for your
particular room.
Make sure you do this before moving on to Playing a
source on page 13.
Important
• Make sure the microphone and speakers are not
moved during the Auto MCACC Setup.
• Using the Auto MCACC Setup will overwrite any
existing speaker settings in the receiver.
• Before using the Auto MCACC Setup the
headphones should be disconnected and MULTI CH
IN switched off.
• The receiver will automatically exit the current screen
after three minutes of inactivity.
Caution
• The test tones used in the Auto MCACC Setup are
output at high volume.
1 Switch on the receiver and your TV.
2 Connect the microphone to the MCACC SETUP
MIC jack on the front panel.
Make sure there are no obstacles between the speakers
and the microphone.
If you have a tripod, use it to place the microphone so that
it’s about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a
table or a chair.
3 Press RECEIVER on the remote control, then press
the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/ / /
buttons and ENTER on the remote control to
navigate through the screens and select menu items.
Press
RETURN to exit the current menu.
• Press SYSTEM SETUP at any time to exit the System
Setup menu.
4 Select ‘AUTO MCACC’ from the System Setup
menu then press ENTER.
5 Make sure ‘Normal (SB)’ is selected then press
ENTER.
• If you are planning on bi-amping your front speakers,
or setting up a separate speaker system in another
room, read through
Surround back speaker setting on
page 40 and make sure to connect your speakers as
necessary before continuing to step 6.
+10
INPUT ATT FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
ENTER
TV CONTROL
VOL
DVD/LD TV/SAT DVR/VCR TV CONT
CD
ST ST
INPUT
SELECT TV CH
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
REC MUTE
TV VOL
CD-R/TAPE TUNER RECEIVER
ENTER
REC STOP
HDD DVD
D.ACCESS
TOP MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
SYSTEM
SETUP
A
B C D E
TUNE
TUNE
PHONES
TUNER CONTROL
TUNER EDIT
SYSTEM SETUP RETURN PTY SEARCH EON MCACC SETUP MIC
DIGITAL IN S-VIDEO VIDEO
VIDEO2 INPUT
AUDIO L R
MULTI JOG MULTI JOG
TUNING/ STATION BAND MPX TONE ACOUSTIC EQ DIALOG ENHANCEMENT MULTI CH IN SIGNAL
SELECT EXTENDED MODE SPEAKERS MIDNIGHT/
LOUDNESS
MULTI JOG MULTI JOG
System Setup
[ 1. Surr Back System ]
[ 2. AUTO MCACC ]
[ 3. MANUAL MCACC ]
[ 4. Manual SP Setup ]
[ 5. Input Assign ]
[ 6. Other Setup ]
Enter : Select
Return : Exit
2. AUTO MCACC
Surround Back Output
[
Normal (SB) ]
Enter : Start
Return : Cancel
VSX_1015.book.fm 11 ページ ２００５年３月７日 月曜日 午後７時０分