beautypg.com

Hyundai H-LCD702 User Manual

Page 9

background image

9

23 hours. Once you have reached the maximum of 23 hours and the button is
pressed again it will go back to zero hours. Once you have set a specified time,
the device will start automatically at that designated time.

c.

Off-Time: When you have adjusted the time, you can set time for "Off-Time".

Use CH +/- buttons to enter this item, then press the VOL +/- buttons to set it to
"00:00". Press the VOL + button again to increase the time by one minute in
turn to maximum of 59 min. Once you have reached the maximum of 59
minutes and the button is pressed again the clock will go back to zero minute.
Press the VOL - button to increase the time by one hour in turn to maximum of
23 hours. Once you have reached the maximum of 23 hours and the button is
pressed again it will go back to zero hours. Once you have set a specified time,
the device will turn off automatically at that designated time.

Note: The time that has been set will return back to the default time (00:00) if you

unplug the unit from its power socket.

d.

Attention: press CH- to find th original condition of this item, then press

VOL +/- to make it to zero, press VOL + to add one minute, the max can be 59
minutes, then press the button once more, it come back to zero. Press VOL - to
add one hour, the max can be 23 hours, then press the button once more, it come
back to original condition. The unit will alarm you automatically when the
ATTENTION time comes.

e.

Ch-Time: press CH+ to find the original condition of this item, then press VOL

+/- to make it to zero, press VOL + to add one minute, the max can be 59
minutes, then press the button once more, it come back to zero. Press VOL - to
add one hour, the maximum hour can be 23 hour, then press the button once
more, it come back to original condition. The unit will alarm you automatically
when the booking time comes.

f.

Position: press CH +/- to select Position. Press VOL +/- to change channel

number or press 1 to 9 buttons to insert the channel number directly. The unit will
turn on automatically to the preset channel at the preset time.