beautypg.com

In case of trouble, Visit our website, Demo mode – Pioneer SUPERTUNERD DEH-P5200HD User Manual

Page 4: Resetting the microprocessor, 01 before you start

background image

U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411

For warranty information please see the Lim-
ited Warranty sheet included with this unit.

In case of trouble

Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.

Visit our website

http://www.pioneerelectronics.com
! Learn about product updates (such as firm-

ware updates) for your product.

! Register your product to receive notices

about product updates and to safeguard
purchase details in our files in the event of
loss or theft.

! Access owner's manuals, spare parts infor-

mation, service information, and much
more.

Demo mode

Important

Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.

The demo automatically starts when the igni-
tion switch is set to ACC or ON while the unit
is turned off. Turning off the unit does not can-
cel demo mode. To cancel the demo mode,
press

/

DISP/SCRL. Press

/

DISP/SCRL

again to start. Operating the demo while the
ignition switch is set to ACC may drain battery
power.

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

RESET button

1

Remove the front panel.

2

Press RESET with a pen tip or other

pointed instrument.

En

4

Section

01

Before You Start