Philips AZ1027/12 - Manual (Page 14)

5
Close the holder.
6
Press to start to record.
To pause, press • .
To resume, press • again.
To stop, press • .
5 Troubleshooting
Warning
Never remove the casing of this Soundmachine. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this Soundmachine, check the
following points before requesting service. If the problem remains unsolved,
go to the Philips web site (www.Philips.com/support), or contact Philips
(see Contact information). When you contact Philips, ensure that your
Soundmachine is nearby and the model number and serial number are
available (see ‘Get started’ ) .
No power
Ensure that the power cord is connected securely. •
Ensure that there is power at the power supply socket. •
Ensure that the batteries are installed correctly. •
No sound
Adjust the volume. •
Ensure that the track played is of a compatible format. •
Display does not function properly./No reaction to operation of any of
the controls.
1 Disconnect the AC power cord.
2 Connect the AC power cord after a few seconds.
Cannot play disc
Ensure that the disc label is inserted with the printed side facing up. •
Wipe the disc with fi bre cleaning cloth from the centre to the edge in a •
straight line.
This disc may be defective. Play another disc. •