Philips VRZ360 - Manual (Page 43)

Multi-Channel Television Sound System 43
Your VCR can receive and record programs broadcast in stereo
or second audio. It can also play back tapes recorded in stereo or
second audio.
• Second Audio You can program your VCR so that you can
hear a program that is being broadcast in second audio or a
tape that was recorded in second audio. (A second audio broad-
cast is usually a program in a second language.) Follow the steps
on page 44 to receive or record this type of program.
• Hi-Fi Stereo Playback If a tape is recorded in stereo, you
can program your VCR to play a tape in Hi-Fi (high fidelity)
stereo. Follow the steps on page 45.
• Hi-Fi Stereo Recording If a TV program is broadcast in
stereo, you can program your VCR to receive and record the
program in Hi-Fi stereo. You must program the VCR and make
the appropriate stereo hookups. Follow the steps on page 44.
To playback this type of program, follow the steps on page 45.
Receiving a Stereo Broadcast
When a TV program is being broadcast in stereo, STEREO will
appear in the status display. You still have to program your VCR
to receive and record the stereo broadcast. Follow the steps on
page 44.
Receiving a Second Audio Program
If a program is being broadcast in second audio, SAP (Second
Audio Program) will appear in the status display. You still have to
program your VCR to receive and record the second audio pro-
gram. Follow the steps on page 44.
STOP 12:00 AM
STEREO CH. 10
REMAINING
TIME
0:45
SLP 1:23:45 HIFI
STOP 12:00 AM
CH. 10
SAP
REMAINING
TIME
0:45
SLP 1:23:45 HIFI
VRZ360 4/7/99 9:53 PM Page 43