Powerware powereware plus 8 - 10 kVA - Manual (Page 13)

UPS 8 – 15 kVA, 230V 50/60 Hz output
User’s Guide
1022403
Revision B1 13
5. Electrical installation
The customer has to supply the wiring to connect the UPS to the local power source. The
electrical installation procedure is described in the following text. The installation inspection
and initial start up of the UPS and extra battery cabinet shall be carried out by a qualified
engineer with UPS installation experience.
Warning!
Physical injury or death may follow, or damage may occur to the UPS, or the load
equipment if these instructions are ignored.
Figure 12. Location of the power terminals.