Philips 100Hz TV - Manual (Page 10)

10
T he AV3 Input Jacks provide Both Component
and RGB Video Inputs at 1080i, for acces-
sories like a HD Receiver and Digital DVD
Players. Using the color difference signals (Pb,
Pr) and the luminance (Y) signal will improve
color bandwidth information. The TV can also
become a monitor for projectors, computers or
HD Receivers using the RGB Input.
1 Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player
(or similar device) to the (Y, Pb, Pr) AV3
IN(put) jacks on the TV.
2 Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accessory
device to the Audio (L and R) AV3
IN(put) jacks on the TV.
3 Connect a RGB cable from the VGA
OUT on the HD Receiver to the AV3
RGB Input jack on the back of the TV.
4 Connect a 75
Ω
round cable from the
OUT TO TV jack on the HD Receiver to
the 75
Ω
IN on the back of the TV.
5 If using a Satellite Dish, Cable signal or
Antenna signal, connect the 75
Ω
round
cable from a Satellite Dish to the SATEL-
LITE IN and/or the Cable and Antenna
signals to the ANTENNA “A” or “B” IN
on the back of the HD Receiver.
6 Press the SOURCE SELECT button
on the remote control to display the
SOURCE menu.
7 Press the CURSOR UP or DOWN
button to select the AV3 option.
8 Press the OK button to confirm your
selection. The TV will change to the
AV3 channel.
U
SING THE
AV 3 I
NPUT
J
ACKS
Coaxial Cable
Lead-in from Cable Outlet,
Converter Box,
or VHF/UHF Antenna
OUT TO TV SATELLITE
IN
DIGITAL AUDIO
OUTPUT
VCR
CONTROL
S-VIDEO
PHONE JACK
VIDEO AUDIO
L
L
R
R
ANTENNA B
IN
ANTENNA A
IN
Coaxial Cable
Lead-in from
Satellite Dish
Coaxial Cable Lead-in
from Alternate RF
Signal Source
5
5
5
COMPONENT VIDEO
Y Pb Pr
AV3
SOUND PICTURE
ACITVE
CONTROL
ZOOM
6
Source
TV
AV1: VCR
AV2: Recorder
AV3: DVD
AV4: HD
SIDE: Camera
7
7
8
1
2
3
4
JACK PANEL
ON BACK OF TV
JACK PANEL
OF DIGITAL DEVICE
SUCH AS A
PROGRESSIVE SCAN
DVD PLAYER
OR HD RECEIVER
Note: If the AV3 channel is tuned and no signal
connection present, the screen could jump or flash.
AUDIO IN
(RED/WHITE)
COMPONENT
VIDEO
CABLES
RGB CABLE
COAXIAL CABLE
LEAD-IN FROM
SATELLITE DISH
COAXIAL CABLE LEAD-IN
FROM ALTERNATE RF
SIGNAL SOURCE
COAXIAL CABLE
LEAD-IN FROM CABLE
OUTLET, CONVERTER BOX,
OR VHF/UHF ANTENNA