Philips SC364 - Manual (Page 5)

4
H
OW TO USE THE BABY MONITOR
Monitoring baby’s sounds
To use the units to listen to your baby:
• Position the Baby unit at least 1 metre away from the baby so that the microphone (A–4)
can pick up baby’s sounds.
• Set the channel switch to the same position on both units.
• Set the mode switch on the baby unit (A–6) to VOICE; the red POWER light (A–1) lights.
• Move away from the Baby unit with the Parent unit.
• Switch on the Parent unit using the Volume control/Off (B–4) and adjust the volume to
the level you prefer; the red POWER light (B–1) lights.
• The green TRANSMIT light (A–2) lights when a sound is picked up by Baby unit.
Talk pushbutton
To use the Baby unit manually to talk to the Parent unit:
• Set the mode switch on the Baby unit (A–6) to OFF.
• Switch on the Parent unit using the Volume control/Off (B–4) and adjust it to about mid-
range; the red POWER light (B–1) lights.
• On the Baby unit, press and hold the TALK pushbutton (A–3) and talk clearly into the
microphone (A–4). Release the TALK pushbutton when you are finished.