Connect, Connect the receiver to your hdtv set – Philips SWW1800/27 User Manual
Page 3
1
DC IN 5V
HDMI OUT
HDMI OUT
1
2
DC 5V
Connect
1
Connect video source to the transmitter using the HDMI cable
Connect one end of the HDMI cable (included) to the HDMI connector of the
•
transmitter.
2
Connect the video source to the transmitter using the component cables
Connect one end of the RCA (green, blue and red) cables to the Y/Pb/Pr IN
•
connectors of the transmitter. Connect the other end of the RCA cables to the
corresponding Y/Pb/Pr OUT connectors of your HD devices.
Connect one end of the set of audio cables to the AUDIO L/R IN connectors
•
of the transmitter. Connect the other end to the corresponding AUDIO L/R
OUT connectors of your HD devices.
3
Connect the power adaptor to the transmitter
Connect one end of the power adapter (included) to the DC IN connector
•
of the transmitter. Connect the other end of the power adaptor to a power
socket.
The power LED indicator lights up in solid red.
»
The HDMI devices and analog devices with the component and stereo RCA start connecting.
»
1
Connect the receiver with an additional HDMI cable (not included):
Connect one end of the HDMI cable to the receiver.
•
Connect the other end to the HDMI OUT connector of your HDTV.
•
2
Connect the power adaptor to the receiver:
Connect one end of the power adapter (included) to the DC IN connector of
•
the receiver.
Connect the other end of the power adaptor to a power socket.
•
Connect the transmitter to your HD devices
Transmitter Receiver
Connect the receiver to your HDTV set