Automatic, Power saving, Physical specification – Philips 105G7 User Manual
Page 13: Pin assignment

* These information are subject to change without notice.
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor
can automatically reduce its power consumption when not in use. And if an input from a keyboard,
mouse or other input device is detected, the monitor will automatically "wake up". The following
table shows the power consumption and signaling of this automatic power saving features:
Physical Specifications
* These information are subject to change without notice.
- Sync
4.7k ohm
• Input signal levels
0.7 Vpp
• Sync input signal
TTL Sync
• Sync polarities
Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K
x = 0.283 / y = 0.297
• at 6500 K
x = 0.313 / y = 0.329
Power Management Definition
VESA's Mode Video H-sync V-sync Power Used Power Saving (%) LED color
ON
Active
Yes
Yes
Typical 62W
0 %
Green
OFF
Blanked
No
No
<5W
92%
orange
• Dimensions
14.2" x 14.3" x 15.3" / 360 x 362 x 387 mm (including base)
14.2" x 12.7" x 15.3" / 360 x 321 x 387 mm (excluding base)
• Weight
11.5kg
• Power supply
90 - 264 VAC, 60-50Hz
(Please refer to rating label)
• Temperature (operating)
0° to 40°C / 32° to 104°F
• Temperature (storage)
-25° to +65°C / -13° to +149°F
• Relative humidity(storage)
5% to 95%