Philips HTS3051B/F8 - Manual (Page 42)

42
LIST OF SETTINGS
EN
Category Menus / Options Description
Adv
a
nced Setup
Others Network Connection
• Refer to pages 48-51
for more
information.
Connection
Test Perform a network connection
test. After you change IP address
or DNS setting, always perform
this test.
Enable(Easy) If you select “Enable(Easy)”,
Connection test will automatically
start.
Enable
(Custom) IP Address
Setting Auto(DHCP) Set the IP address.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual IP Address
Subnet Mask
Default
Gateway
DNS
Setting Auto(DHCP) Set the DNS setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual Primary DNS
Secondary
DNS
Proxy
Setting Do Not Use Set the proxy server.
In most cases, you can connect to
the Internet without using proxy
server.
Use Proxy
Address
Proxy Port
Connection
Speed Auto Set the connection speed.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting Allow You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
Network Status You can check the current status of
the network setting.
Disable Yes Deactivate the network
connection.
No
Software Upgrade
• Refer to page 52 for
more information.
Disc
Upgrade Yes Set the disc upgrade.
You can upgrade the software
version by using a disc.
To download the latest software
version, please visit
www.philips.com/support.
No
Network
Upgrade Yes Set the network upgrade.
You can upgrade the software
version by connecting this unit to
the Internet.
No