Philips SE6590B/37 - Manual (Page 19)

17 Registration
1
To remove the belt clip, simply pull
the clip away from the handset.
2
To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
5.5 Install optional headset
Your handset may be used with an
optional headset (not included in the
box). To use this feature, insert the
headset plug into the headset jack. Your
handset is ready for hands-free
conversations.
6 Registration
6.1 Registering the handset
You must register your handset to the
base station before you can use it. Up to
8 handsets can be registered to one base
station.
The PIN is required before you can
register or unregister handsets.
By default, the PIN is 0000.
6.1.1 Easy registration
1
Insert the unregistered handset into
the base station to automatically
begin registration.
2
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
6.1.2 Manual registration
1
Power on the handset.
2
On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base station is
ready to accept registration. (No
beep sounds on the SE650.)
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
Diameter: 2.5 mm
Note