Panasonic DMC-LC1PP - Manual (Page 10)

Preparation
10
Charging the Battery
Charge the battery before using.
1 Connect the AC cable.
• The [POWER] indicator A lights.
• The battery cannot be charged
when the DC cable is connected to
the AC adaptor.
2 Attach the battery to the AC
adaptor.
• Put the battery along the mark
horizontally and slide the battery.
• When the [CHARGE] Indicator B
lights, charging starts.
• When the [CHARGE] indicator B
turns off (in about 110 minutes),
charging is finished.
3 Detach the battery.
¬Suggestions/Tips ¬
• After use, be sure to disconnect the
AC cable.
• The battery becomes warm after use/
charge or during charge. The camera
also becomes warm during use.
However, it is not a malfunction.
• The battery and AC adaptor are
designed only for this camera. Do
not use them with any other
equipment.
• Do not disassemble or alter the AC
adaptor.
• The battery cannot be charged in the
camera with the AC adaptor
connected.
LC1PP.book 10 ページ ２００４年１月２６日 月曜日 午後６時５０分