How to check or change a timer, How to clear a timer – Philips 14PV207 User Manual
Page 19
D Under ’
VPS/PDC
’, use the
P rB
or
AP q
button to switch ’VPS or PDC’ on or off.
D The TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
f
Confirm with the
OK
button when the information is
correct.
E ’
Press STANDBY to start recording
’
will appear on the screen. If you have programmed a
recording that should start within the next few minutes,
confirm with the
STANDBY m
button. If you have
programmed a recording that will start at some later point
in time, confirm with the
OK
button.
D A programmed recording can only start, when the
machine is switched to standby.
D If you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g
If you confirmed with the
OK
button, exit the menu with
the
TIMER k
button.
D The programming information has been stored in a
TIMER block.
h
Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the
menu buttons
P rB
or
AP q
and confirm with the
SqC
button.
c
Select the TIMER you want to check or change with the
P rB
or
AP q
button and confirm with the
OK
button.
d
Select the entry field with the
DSr
or
SqC
button.
e
Change any information with the
P rB
or
AP q
button or with the
0-9
buttons.
D Under ’
LP
’, use the
P rB
or
AP q
button to
select the recording speed ’SP’ or ’LP’.
f
Confirm with the
OK
button when the information is
correct.
g
Confirm the message on the screen with the
OK
button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
h
To end, press the
TIMER k
button.
i
Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
Timer programming
’ with the
menu buttons
P rB
or
AP q
and confirm with the
SqC
button.
c
Select the TIMER you want to clear with the menu
buttons
P rB
or
AP q
.
d
Press the
CLEAR
button.
e
Switch off with the
TIMER k
button.
17