Panasonic RX-ES23 EN - Manual (Page 12)

RQT7912
12
Setting the Clock
This is a 24-hour clock.
[1] Press [ ] to turn the unit on.
[2] Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
[3] Within 10 seconds
Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the time or on remote control, press [–/ :]
or [ 9/+].
[4] Press [CLOCK/TIMER] to start the clock.
The original display is restored shortly after.
Note:
≥ The clock may lose or gain some time over a period.
Readjust if necessary.
To display the clock
Remote control only
Press [DISPLAY].
The Play and Record Timer
You can set the timer to come on at a certain time to wake you
up (play timer) or to record a radio station (record timer).
Preparations:
Turn the unit on and set the clock.
For play timer, prepare the music source (tape/CD/radio) for
listening, and set the volume.
For record timer, check the cassette’s erasure prevention tab
(
l 10) and load the cassette with the side for recording facing
up. Tune to the radio station ( l 7), and set the volume.
To set the start and finish times
[1] Press [CLOCK/TIMER] to select the desired timer
function.
ON PLAY: to set the play timer
ON REC : to set the record timer
Proceed to step [2] before these indicators stop flashing
(about 10 seconds).
[2] Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the start time and then press [CLOCK/TIMER].
[3] Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the finish time and then press [CLOCK/
TIMER].
The start and finish times are now set.
VOLUME
TAPE ⁄ CD
CLOCK
# #
# #
]
n (
]
n ,
Original display
ON PLAY OFF PLAY
ON REC OFF REC
E_EB_GN_RQT7912-B.book 12 ページ ２００４年１２月８日 水曜日 午後４時１５分