Philips 35LC - Manual (Page 8)

11A. MAINTENANCE
A. DURING USAGE
1. While trimming, hair will col-
lect on top of Hair Clipper.
Frequently shake Hair Clipper
lightly over wastebasket and
hair will easily fall away.
■ Do not tap on hard surface.
2. If too much hair collects while
trimming, switch Hair Clipper
OFF. Remove Guide Comb
and lightly shake or brush
hair from Hair Clipper and
Guide Comb with cleaning
brush provided.
3. If Hair Clipper slows down
while trimming, the cutters
may need to be oiled (see
BLADE MAINTENANCE).
B. AFTER USAGE
■ It is important to clean out
Hair Clipper after each use.
1. Switch Hair Clipper OFF.
2. Remove Guide Comb and
lightly shake or brush hair
from Hair Clipper and Guide
Comb.
3. Clean cutters and inside of
Hair Clipper with long bristles
of brush (Fig. 14).
4. Oil the steel blades of cutters
after every use with three
drops of oil - (see BLADE
MAINTENANCE).
11B. BLADE
MAINTENANCE
IMPORTANT
■ Do not over oil.
■ Never use Hair Clipper with a
damaged or broken cutter or
Guide Comb.
■ Hair Clipper should be clean
and lubricated.
■ Clean Hair Clipper regularly.
■ Do not apply pressure to cut-
ters. Do not touch cutters
with hard objects as this may
dent or damage cutter blades.
■ Do not use sharpeners as this
will damage your cutter
blades and will adversely
affect the cutting perfor-
mance.
A. AFTER EACH USE
1. Always switch Hair Clipper OFF
and remove plug from outlet
before cleaning. Never remove or
replace Guide Comb with motor
ON.
■ To help cutter blades stay sharp
longer, it is recommended that
you oil blades with the supplied
Lubricating Oil or light machine
oil.
2. Remove Guide Comb attachment
and lubricate outer cutting blades
after each use with 3 drops of oil.
3. Spread lightly over blades with
finger tip. Replace Guide Comb
Attachment.
B. ONCE A MONTH
To keep the cutting unit working
properly, it is recommended that you
oil the inner portion of the cutting
unit with the supplied Lubricating Oil
or light machine oil once a month.
1. Remove the Guide Comb
Attachment from the Hair Clipper.
2. Gently push cutting unit backward
(Fig. 15). Oil the metal blades on
the inner side of the cutting unit
with three drops of oil (Fig. 16).
3. Click cutting unit back to original
position by pushing forward.
Replace Guide Comb Attachment.
■ When cutter blades eventually
become dull, they must be
replaced. Do NOT use sharpen-
ers. There are no user serviceable
parts.
For cutter blade replacement
information, call 1-800-243-7884.
14
14
16
15 16