Philips LFH 660 - Manual (Page 10)

10 User manual
Record with the built-in microphone 5.1
Press the 1 INDEX / a button 1 while the recorder is stopped to
select the desired folder A .
Press the 2 g button 2 to start recording. The record/play
indicator lights red B . Point the built-in microphone toward the
sound source.
To pause recording, press the
3 g
button 2 . The record/play
indicator will blink B , and PAUSE will flash on the display C .
Press the
g
button again to resume recording.
To stop recording, press the 4 j / DEL button 3 .
C
B
A
1 2
3
D Notes
Set the desired voice activation function and recording mode before •
starting recording (see Customize settings on page 16 for details).
Make a test recording to make sure that the Voice Tracer settings
•
are correct.
Press and hold
• f during recording to display the remaining
recording time.
Press
•
b
during recording to create a new file.
The maximum number of files in each folder is 99, for a total capacity •
of 396 files (99 files x 4 folders).
If the recording time exceeds the available capacity or the number of
•
files reaches 396, recording stops and ‘FULL’ will be displayed. Delete
a few recordings or move them to a computer.
Do not remove the batteries during recording. This may cause the
•
recorder to malfunction.
If recording for a prolonged period of time, replace the batteries
•
before beginning.
The Voice Tracer can record while powered through a USB cable
•
without draining the battery. Connect the recorder to a computer
using the USB cable and press the
g button for 1 second or longer
to start recording (LFH860/870/880 only).
Record 5