Philips DVD712 - Manual (Page 16)

PLAY
PREV
STOP
NEXT
SOUND
OPEN / CLOSE PAUSE
POWER ON/OFF
DVD 712 DVD/VIDEO CD/CD PLAYER
by
16 Playing a Disc
1
Press the POWER ON/OFF button on the front of the
DVD Player to turn on the DVD Player.
Turn on your TV. Make sure it is set to the correct Video
In channel. You should see the DVD logo on the TV screen.
Details are on page 9.
2
Press OPEN/CLOSE on the front of the DVD Player to
open the disc tray. Load your Disc in the tray, with the label
facing up. If the Disc is two-sided, make sure the side you want to
play is facing up.
3
Press OPEN/CLOSE again to close the tray. READING
flashes on the DVD Player’s display. Playback may begin auto-
matically.
4
If DVD playback does not start automatically, a Disc menu
may appear. If the Title or Chapter selections are numbered,
press a Number button to select an item. Or, press the p
o s B
buttons to select an item, then press OK. The num-
ber of the current Title and Chapter will appear on the display
panel. Playback will begin.
If Audio CD playback does not start automatically, press
PLAY B to begin Audio CD playback.
5
Playback will stop at the end of the Title or after the last
Track.
6
To stop playback at any time, press STOP C.
To resume playback at the point at which you last stopped play-
back on a DVD, press PLAY B. While you see Resume IB on the
TV screen, press PLAY B again.
The resume feature applies not only to the current DVD, but also
to the last four discs you played. Reload a Disc and press the
RESUME button. Or, press PLAY B while you see Resume IB on
the TV screen.
• If the Disc is Locked by Access
Control, you must enter the 4-
digit code or authorize the Disc.
Details are on pages 30-34.
• DVDs have a region code. Your
Player will not play discs that
have a region code different from
the region code of your Player.
The Player’s region code is 1
(one). Details are on page 7.
• Resume may not be available
with some DVDs.
Helpful Hints
6
4
DVD AUDIO CD VIDEO CD
1 2-3