Patriot Products 10F-CSV - Manual (Page 20)

Detail of the outboard bearing assembly.
The bearing is sealed and does not need
lubrication.
Both the shredder hopper and the chipper cone are
assembled with the same hardware and wrench.
21
39 B
39 A
30
32 Scre ws (inside)
33 W ashers (inside)
31 Nuts (outside)
Detail of the shredder hopper.
32
33
31
27 29
page 20
set
screw
lock
collar
bearing
CA UTION: THE ROTOR WILL
COAST EVEN AFTER THE ENGINE
IS OFF. MAKE SURE THE
ROTOR STOPS TURNING, THEN DIS-
CONNECT THE PLUG WIRE FROM THE
ENGINE BEFORE ATTEMPTING ANY
MAINTENANCE OR CLEAN-OUT. IF THE
R O T O R
IS STILL TURNING, IT MAY
CAUSE SERIOUS PERSONAL INJURY.
▲
!
32 Scre w
33 W asher
31 Nut