Peavey PM 1 - Manual (Page 9)

CUE
This section identifies and describes the Cue features of the PM One. The Cue allows you to
preview and stage material prior to playing through the mains (Output-amp).
23. CUE ASSIGN
Use this selector to determine which pair of channels you would like to cue at one time. Your
options include CH 1/2, CH 3/4, and MASTER. Along with the Cue Monitor (25), you can pan
between Channels 1 and 2 or Channels 3 and 4 in your headphones. In addition, you may select
the MASTER setting to monitor the signal going to your mains.
24. CUE LEVEL
This adjusts the volume level in your headphones. It will not affect the output to your mains. Always
begin adjusting this level from the Т0У position upward to avoid hearing damage.
25. CUE MONITOR
Use this fader to pan between Channels 1 and 2 or Channels 3 and 4 in your Cue mix. The
channels affected by this control are determined by the Cue Assign (23) selector.
26. HEADPHONE OUTPUT
This stereo 1/4" jack provides a Cue output for a standard pair of stereo headphones. Use the Cue
Level (24) to adjust the volume. Use the Cue Assign (23) and the Cue Monitor (25) to determine
what you wish to monitor.
9