Philips 639 User Manual
Page 52
Messages
51
-
ISDN number
to enter an ISDN ISP number, OR
-
Analogue No.
to enter an analogic number, then
press
,
.
Contact your ISP to know what type of number you
should select.
Auto disconnection
: allows you to select an inactivity
time period after which the phone automatically
disconnects (if a connection was is progress) from the
network. Press
+
or
-
to select a value from 3
to 10min. and press
,
to validate.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the
inactivity time period leading to auto disconnection.
Login
and
Password
were up to you when you
subscribed to your account. Enter them also as
defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
1.
Press
,
, select
Messages
>
>
E-mail 1
>
Settings
and press
,
.
2.
Select
E-Mail server
and press
,
. The fields to
be completed are the following:
POP3 address
,
SMTP address
,
Login
,
Password
and
address
.
•
POP3 address
: allows you to enter the IP or DNS
address of the POP3 server, which is used to
receive e-mails.
•
SMTP address
: allows you to enter the IP or DNS
address of the SMTP server, which is used to
send e-mails.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not your e-mail
provider, contact your operator to get the correct address of
the SMTP server and enter it in this field.
In some cases,
Login
,
Password
and
E-mail address
are
up to you when you subscribe to your account. Enter
them as defined.
Account name
This menu allows you to rename the available e-mail
accounts.
An e-mail account might be preconfigured with the
name of your operator. In this case, its name cannot be
changed.
Philips639_APMEA_CTA_GB.book Page 51 Saturday, February 28, 2004 2:40 PM