Philips 639 - Manual (Page 43)

42 Settings
For data calls
Your phone will automatically register to the GPRS
service only when required. This option reduces
energy consumption, however it will increase the
connection delay.
In spite of these settings, you must still select the bearer
(GSM or GPRS) in the menus of each application to
be used (e.g., WAP, MMS, e-mail, etc.).
Register again
Provides you with a list of the networks
available in the area when the
Manual
mode is selected. Select the network you
want to register with and press
,
to confirm.
Preferred list
Allows you to build a network list in
order of preference. Once defined, the
phone will try to register on a network,
according to your preferences.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
sending a multimedia message (MMS),
the selected profile will be used to connect to the
GSM or GPRS network.
All options described below are operator and/or
subscription dependent.With some operators, you may
receive a SMS which contains access parameters that
will be stored automatically. Please contact your
network operator for detailed information on this
subject.
Change name
Allows you to enter or change the name
of the selected profile. Press
,
, enter
the name of your choice and press
,
to confirm.
Some pre-configured profiles might be locked,
preventing re-programming and renaming.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
etc.), either
GSM or GPRS .
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the
following items:
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
and press
,
to confirm.
Register again
Preferred list
Access settings
Change name
Show
GSM settings
Philips639_APMEA_CTA_GB.book Page 42 Saturday, February 28, 2004 2:40 PM