Panasonic KX-TDA0484 - Manual (Page 31)

2.2 Programming
Programming Guide 31
Example 2
The following configuration is used to allocate a single VoIP gateway port (2 channels) to individual
extension groups. Specifically, with this configuration, calls to extension group A are routed through
the port 1, and calls to extension group B are routed through the port 2.
This configuration rejects the third call to extension group A, while reserving the other port (the other
2 channels) through which to route calls to extension group B.
Hunt Group
Hunt Pattern Entry—1
Hunt Pattern Entry—2
It is possible to program the PBX to allocate a single VoIP gateway port to individual extension groups
A and B for making outgoing calls. With this programming, each extension group A and B can have
a port for its exclusive use.
• The VoIP gateway port the extension group A uses to make outgoing calls: port 1
• The VoIP gateway port the extension group B uses to make outgoing calls: port 2
Port1 Port2
Hunt Group Hunt group 1 Hunt group 2
Hunt Pattern No. 1
Receive Leading Number 9501
Hunt Group (Priority1) 1
Hunt Group (Priority2) -
Hunt Pattern No. 2
Receive Leading Number 9502
Hunt Group (Priority1) 2
Hunt Group (Priority2) -
IP Network
VoIP Gateway Card
Port 1
PBX (PBX Code: 950)
Extn. Group A
Extn. 101 ... Extn. 199
Channel 1
Channel 2
Extn. Group B
Extn. 201 ... Extn. 299
Port 2
Channel 1
Channel 2
Dials "950-101".
Dials "950-102".
Dials "950-103".
Dials "950-201".
Dials "950-202".