Panasonic KX-TDA0484 - Manual (Page 26)

2.2 Programming
26 Programming Guide
Others
* Inter-Digit Time (s) 1-10s
Specifies the length of time (in seconds) within which
subsequent digits of a dial number must be dialed.
Generally, there is no need to change the default value.
5 1 to 10
* Digit End Code
Specifies the delimiter code to be used to signal the end of a
dial number.
Generally, there is no need to change the default value.
# 0 to 9, #, *
Parameter & Description Default Value Range
Network CODEC of IP-PBX
The value of this parameter is set automatically as
appropriate to the setting of the PBX.
There is no need to change the value.
Not applicable G.711 Mu-Law,
G.711 A-Law
Parameter & Description Default Value Range