Philips FW-C80 - Manual (Page 14)

3139 116 19662 (ENG)
14
Dim mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
DIM appears on the display.
™ "DIM 1", "DIM 2", "DIM 3" or
" DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with
Spectrum Analyzer On
OPERATING THE SYSTEM
DIM 3 - half brightness with
Spectrum Analyzer Off and all LEDs
on the system will be switched off.
Volume Control
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
1 Press MUTE on the remote control
to switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
Sound Control
For Optimal sound listening, you
can only select one of the following
sound control at a time : DSC, VEC
or BASS/TREBLE.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust
the system to select a type of
environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERTor ARCADE" will be
displayed.
BASS/TREBLE
The BASS/TREBLE features enable you
to define the sound processor settings
for Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
™ The BASS and TREBLE LED will
be lit.
™ "ADAPT BASS AND TREBLE
LEVELS" will be displayed.
2 Use BASS/TREBLE CONTROL to
select the desired BASS or TREBLE
level respectively.
™ The BASS/TREBLE level will
increase or decrease between
level +3 and -3.
pg 01-28/C80/37-Eng 2/16/00, 9:05 AM 14