Changing the phone settings, Changing the phone settings –8 – PYLE Audio CX300 User Manual
Page 14
User Guide for the Polycom CX300 Desktop Phone
1 - 8
3.
Select Tools, click Set up Audio and Video..., and then follow the
instructions in the Audio and Video Device Setup wizard.
a
In the wizard, ensure that the Speaker and Microphone device
options are both set to Polycom CX300 for the Handset or Headset
setup pages. Click Next.
b
Ensure that the Speaker/Microphone or Speakerphone device
options are both set to Polycom CX300. (You may need to select
Custom in the top text box to enable you to properly select the speaker
and microphone.) Click Next.
c
If you want ringing and other sounds made by your computer to
output from the Polycom CX300 earpiece, select the Polycom CX300 to
be the device for the Sounds setup page. Otherwise ensure that your
PC sound output device is selected.
d
Click Finish to exit the wizard.
Changing the Phone Settings
You can modify the volume and text display settings of your phone. These
settings can be accessed while 5=settings is displayed on the splash screen,
which is displayed on the phone at startup. 5=settings is displayed for 10
seconds.
Press the * dial pad key to return to a previous menu or exit phone settings
menu.
This section contains instructions for:
•
•
Note
Contact your system administrator to ensure your account is configured for
Enterprise Voice mode.
Note
If the language setting of Microsoft Office Communicator 2007 R2 is not English,
the 5=settings is not displayed with the splash screen. However, you can still
access the phone settings if you press the 5 dial pad key during the first 10 seconds
of the splash screen’s display.
Warning
Do not disconnect the phone from the computer that is running Microsoft Office
Communicator 2007 R2 when making changes to the phone settings. This could
result in data corruption.