Pioneer VSX-1325-K - Manual (Page 13)

Controls and displays 02
13
En
TUNER EDIT – Use with TUNE /, PRESET /
and ENTER to memorize and name stations for recall
(page 45).
4 Indicators
ADVANCED MCACC – Lights when EQ is set to ON in
the AUDIO PARAMETER menu (page 59).
PQLS – Lights when the PQLS feature is active
(page 58).
HDMI – Blinks when connecting an HDMI-equipped
component; lights when the component is connected
(page 24).
iPod/iPhone – Lights to indicate iPod/iPhone is
connected (page 33).
5 Character display
See Display below.
6 ENTER
7 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 10).
8 MASTER VOLUME dial
9 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
10 Listening mode buttons
AUTO SURR/ALC/STREAM DIRECT – Switches
between Auto Surround (page 52), Auto Level Control
mode and Stream Direct mode (page 54).
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes (page 54).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 53).
STANDARD SURROUND – Press for Standard
decoding and to switch various modes (
2 Pro Logic,
Neo:6, etc.) (page 52).
HOME THX – Press to select a Home THX listening
mode (page 53).
11 SPEAKERS
Use to change the speaker terminal (page 62).
12 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see MULTI-
ZONE setup on page 30) use these controls to control the
sub zone from the main zone (see Using the MULTI-ZONE
controls on page 62).
13 MCACC SETUP MIC jack
Use to connect the supplied microphone (page 37).
14 iPod/iPhone/USB terminals
Use to connect your Apple iPod as an audio and video
source, or connect a USB device for audio and photo
playback (page 33).
15 HDMI input connector
Use for connection to a compatible HDMI device (Video
camera, etc.) (page 32).
Display
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 55).
2 Program format indicators
Light to indicate the channels to which digital signals are
being input.
L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( )) indicators light
when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above, the mono
surround channel or matrix encode flag
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected.
2 DIGITAL – Lights with Dolby Digital decoding.
2 DIGITAL PLUS – Lights with Dolby Digital Plus
decoding.
PCM
HDMI
DIGITAL
ANALOG
L C R
SL SR
XL XR XC
LFE
AUTO DIGITAL PLUS
AUTO SURROUND
STREAM DIRECT
PROLOGIC x Neo:6
THX ADV.SURROUND
STEREO STANDARD
SP AB SLEEP
DSD PCM
DTS HD ES 96/24
MSTR
S.RTRV SOUND UP MIX OVER MONO dB
2
MULTI-ZONE STEREO TrueHD WMA9Pro PQLS ALC ATT 2
2
USB XM VIDEO TV DVD
HDMI DVR BD
CD TUNER SIRIUS
CD-R iPod [ 2 ] [ 3 ] [ 4 ]
TUNED
2 1 3 9 7 5 4 10 8 11 12 13
18 19 15 16 17
14
7
6
VSX-1325_UXJCB.book 13 ページ ２０１０年３月９日 火曜日 午後３時４分