Philips sensiflex HX2745 - Manual (Page 10)

C
6 Push the slide on the handgrip upwards to
make the water start running.
When you use the water jet for the first time, let
the appliance run until the water reservoir is
completely empty (let the water drain away into
the washbasin).You can then refill the water
reservoir and start using the appliance.
Tip: for extra freshness, you can add mouthwash
to the water in the water reservoir. After using
mouthwash, fill the water reservoir with clean
water and let the appliance run until the water
reservoir is empty (let the water drain away into
the washbasin).
How to use the water jet
C
1 You can adjust the water volume by
turning the control ring.
Tip: we advise you to use a low water volume
setting while you are getting accustomed to the
oral water jet and when you are troubled by gum
inflammation.
C
2 Bend over the washbasin and hold the jet
tip close to your teeth.
C
3 Press the on/off button to switch the
water jet on.
ENGLISH
10