PYLE Audio FWM352 - Manual (Page 19)

English
19
Radio Reception
Manual Preset Programming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press PROGRAM.
➜
PROG starts flashing.
➜ The next available preset number is displayed
for selection.
To store the radio station to another
preset number
● Press í or ë to select the desired preset
number.
3
Press PROGRAM again to store the radio
station.
➜
PROG disappears.
● Repeat steps 1–3 to store other radio stations.
To exit manual preset mode
● Press STOP 9 on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "
PROGRAM FULL" is displayed.
– During programming, if no key is pressed within
25 seconds, the system will exit the programme
mode automatically.
Tuning to preset radio stations
● Once you’ve programmed the radio stations,
press
í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
For Recording, please refer to “Tape
Operation/Recording”.
pg001-027_M352_22_Eng 2005.12.23, 15:53 19