beautypg.com

8 troubleshooting problems, Symptom problem solution – Polaroid PhotoMAX PDC 2070 User Manual

Page 43

background image

42

Polaroid PDC 2070 Digital Camera User Guide

www.polaroid-digital.com

43

Polaroid PDC 2070 Digital Camera User Guide

www.polaroid-digital.com

8 Troubleshooting Problems

The troubleshooting guide is designed to help you. If problems continue,

please contact your local customer support hot-line. See your registration

card for help line contact details.

I receive an error message

when I am installing “PDC

2070 Camera Driver”.

PDC 2070 Camera Driver

does not load.

I cannot run the PDC 2070

Camera Driver.

I cannot upload images to

the PC.

Connection failure.

Check all cable connections are

secured.

Conflict

with

another

camera

driver

capture

device.

If you have any other camera

installed on your computer,

remove the camera and its

driver completely from your

system to avoid conflict with

another camera or capture

device.

Shut down all other applications

and attempt to reinstall the

driver.
Check the USB controller in

your BIOS if they are activated.

If these do not work, contact

your national customer support

representative.

Symptom

Problem

Solution

I cannot upload the images

from the internal memory

of the PDC 2070 camera

to PC.

The SMC Card is inserted

inside the SMC Card slot.

The memory card has a higher

priority

than

the

internal

memory for image storage,

image transfer or deletion.

I cannot switch on my

PDC 2070 Camera after

inserting a SMC Card.

The SMC Card is not inserted

all the way in or card slot

door is not closed properly.

Make sure the SMC Card is

inserted all the way in and close

the slot door properly.

I press the shutter button

but no response.

The PDC 2070 Camera is

processing the image.

Or

The internal memory or

SMC card memory is full.

Wait for this process to

complete and then take your

next image.

Or

Delete some images in the

internal memory from the

camera or SMC card.

The camera is set to the

Capture mode.

Set the camera to Playback

mode.