Profoto Pro-7 - Manual (Page 11)

ProTwin cont.
10.15.32 Flash Tube, uncoated
10.20.07 Modelling Light 500W, 120 V, mini-can socket (E11)
10.07.09 Handle for ProHead, Pro-7b head and ProTwin
ProT
win
11
or glass cover the lamp cable must be disconnected from the
generator.
The modelling light has a mini-can socket (E11). The flash
tube has two metal pins. When removing a flash tube, pull it
straight out of the sockets. When inserting a new flash tube,
check that the trigger-wire clasps properly around the flash
tube (please see mounting instructions in package).
When mounting the glass cover, check that both locking
springs connect properly into glass cover holes. In case the
head overheats the modelling light automatically switches
off. When the temperature has dropped sufficiently the mod-
elling light will switch on again. At the back of the head there
is an opening for attaching accessories such as filters and
barn doors. There are glass covers for different colour tem-
peratures available.
Magic arm
Fits ProHead, Pro-7b head
and ProTwin. Filters and
Barn Doors can be attached.
Handle
Fits ProHead, Pro-7b head
and ProTwin. Makes it easier
to manoeuvre lamp heads
when using soft boxes.
(Included with all ProHeads)