Plawa Scrivo.1 User Manual

Page 16

Double Click

This setting allows users to adjust the double clicking action using scrivo.1. Move your cursor to
the target diagram and double click. The values in the small dialog box will change. By clicking
“Apply” you can set the value according to the double click action you just made. It will be helpful

to click several times. The corresponding range
values appear. If you want to change it to the
default setting, simply click on “Default’.
(Default: Speed 600ms, Range 32x32 pixels).
If speed is set too fast or too centred in the
circle, users might experience discomfort with
scrivo.1.

Coordination

This setting allows users to choose between right-handed and left-handed use. This is convenient
for left-handed users. Select “coordinates” and then click and drag the red coloured area to draw
out the most comfortable position. This setting applies the best hand position for users. When
you want to apply the default setting, simply click (Set default).

Hot Key

For user’s convenience, a hot key feature has been added to open the scrivo.1 control center

and to switch between pen/mouse mode. The
“Finger Note

” utilitiy can also be used with a

hot key. Users can open the scrivo.1 control
center or switch mode by pressing the key that
has been set for the hotkey on any screen. The
hot key’s key can be customized by users.
(Default: Open scrivo.1 control center -> F12,
Mouse/Pen Mode Change -> F4 Finger Note

->F6).

Wheel setting

This setting allows users to configure the wheel function. The default value is 3 lines when opera-
ting the window with the mouse pointer. Users can change the number of lines, reverse scroll,
select window.

scrivo.1 info

An overview of scrivo.1 driver version information and manufacturer information is shown here.

scrivo1_manual_eng_rz_kb2.qxd 06.12.2004 17:40 Uhr Seite 30