Philips AZ 2020 - Manual (Page 6)

BASIC FUNCTIONS
6
Switching on and off
• Adjust the POWER slider to the desired sound source: CD,
TUNER or TAPE.
• The set is switched off when the POWER slider is in the
TAPE/OFF position and the keys on the tape deck are
released.
™ The volume, tone, sound settings and tuner presets will be
retained in the set's memory.
™ When switching off, may show briefly in the display
if you have been using the CD or tuner function.
PHILIPS demo mode
1. On the set, press the CD STOP
9 button for 5 seconds.
™ PH..IL ..IPS and demo mode messages scroll across the
display continuously.
2. To return to the current display you can either:
• press any function button on the front panel. This interrupts
the demo mode for 30 seconds;
• press the CD STOP 9 button for 5 seconds. PH..IL ..IPS
scrolls across the display once before the demo mode is
cancelled.
Adjusting volume and sound
1. Turn the VOLUME control clockwise to increase or anti-
clockwise to decrease volume on the set.
For AZ 2025 model only:
Press VOLUME 3 or 4 on the remote control.
™ Display shows the volume level VoL and a number from 0-32.
2. Press DIGITAL DYNAMIC BASS BOOST once or more to
switch on or off.
™ If on, indicator 1 lights up. Press again if you want extra bass
and indicator 2 lights up.
3. To adjust the treble tone level, press ULTRA HIGH CLARITY
once or more to switch on or off.
™ If on, the indicator lights up.
4. Press INCREDIBLE SURROUND once or more to switch the
surround sound effect on or off.
™ If on, the indicator lights up.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
AZ 2025 /00 page 6
BATT LOW
English