Philips AZ 2020 - Manual (Page 10)

Programming track numbers
In the STOP position, select and store your CD tracks in the desired
sequence. If you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1. Use the SEARCH
∞ or § on the set, (for AZ 2025 model only:
on the remote control ¡ or ™) to select your desired track number.
2. Press PROGRAM.
™ Display: PROGRAM and the selected track number P
rog
appears briefly.
™ If you attempt to programme without first selecting a track
number, no SEL or no P
rog scrolls across the display.
3. Repeat steps 1-2 to select and store all desired tracks.
™ FULL is displayed if you attempt to programme more than
20 tracks.
4. To start playback of your CD programme, press
PLAY•PAUSE 2; (for AZ 2025 model only: on the remote
control 2;).
Reviewing the programme
In the STOP position or during playback, press and hold down
PROGRAM for a while until the display shows all your stored track
numbers in sequence.
Erasing a programme
You can erase the programme by:
– pressing STOP
9 once in the STOP position or twice during
playback.
• no P
rog scrolls across the display briefly and PROGRAM
disappears.
– you select another source: TAPE / TUNER.
CD PLAYER
10
AZ 2025 /00 page 10
BATT LOW
BATT LOW
English