Polycom TRAPEZE NETWORKS 1725-36060-001 - Manual (Page 11)

Trapeze Networks: Mobility System for MP 422 Access Points
PN: 1725-36060-001_D.doc 11
Checking the configuration
Once the switch is configured, issue the following command at the
command prompt to check the SVP settings:
sh ap qos-stats
The following information should be displayed (repeat the command
to see changes):
CoS Queue Tx
===========================
port: 1 radio: 1
1,2 Background 0
0,3 BestEffort 604
4,5 Video 0
6,7 Voice 79106
# Voice should have
the most traffic.
port: 1 radio: 2
1,2 Background 0
0,3 BestEffort 0
4,5 Video 0
6,7 Voice 0
The switch and AP are now ready for use with SpectraLink Wireless
Telephones.
The network topology and other functions can also be configured
using the Mobility System software. Please refer to the Trapeze
Networks Mobility System Software Configuration Quick Start Guide or
Trapeze Mobility Exchange Installation and Basic Configuration Guide for
more information.