beautypg.com

Instructions for use, Setting the remote control – Philips SBC RU 00U User Manual

Page 5

background image

Instructions for use

English

5

3

Check whether all the keys are working.
For an overview of the keys and their
functions see ‘3. Keys and functions’.

If the TV responds as it should to all of the key
commands the RU545 is ready for use.

If the device does not respond at all or not to all of the
key commands, follow the instructions under
‘Setting the remote control’.

Setting the remote control

This is only necessary if your appliance does not respond to the RU545.
If that is the case, the RU545 does not recognize the brand and/or model of
your appliance and you need to program the remote control to do so.
The example below (TV) instructs you how to do this.
You can repeat the same steps for other appliances
(DVD, video recorder, etc.) which you want to operate using the RU545.

Example of TV:

1

Turn on the TV manually or use the original remote control.
Tune in to channel 1.

2

Look up the brand of your TV in the code list at the back of this
manual. One or more four-figure codes are shown for each brand.
Note the first code.
Be careful! There are separate tables for TV, video, DVD, etc.
Make sure you use the codes from the correct table.

3

Select TV with the mode selector.
(See ‘Testing the remote control’.)

4

Keep keys ‘1’ and ‘3’ pressed simultaneously
for five seconds until the green light under TV
in the selector window flashes twice and then
remains lit.

5

Then enter the code noted in step 2 using the digital keys.

The green light in the selector window will now flash twice.
If the light flashes once for an extended period, the code has not been
entered properly or the wrong code has been entered.
Start again from step 2.

6

Point the RU545 at the TV and check that it responds as it should.

If the TV responds to all of the key commands, the RU545 is ready for
use. Do not forget to note your code.

If the device does not respond at all, or not to all of the
key commands, start again from step 2 and try the next code
from the list.

M

EN

U

OK

PROG

AV

PROG

VOL

VOL

TV

VCR

SAT DVD

M

EN

U

OK

SHIFT

1

2

3

4

5

6

7

8

0

9

XP SBC RU 545/00U.2 08-04-2004 11:32 Pagina 5

This manual is related to the following products: