Installation ii menu, Nstallation, Ii m – Planar PR Line PR6022 User Manual
Page 37
DLP
®
Projector – User’s Manual
Installation II Menu
Press the Menu button to open the OSD menu. Press the cursor
◄►
button to move to the Installa-
tion II menu. Press the cursor
▲▼
button to move up and down in the Installation II menu. Press
◄►
to change values for settings.
Item
Description
Auto Source
Press the cursor
◄► button to enable or disable automatic source detection.
(Range: On ~ Off)
Auto Power Off
(min.)
Press the cursor
◄► button to enable or disable automatic shutdown of lamp
when no signal.
Auto Power On
Press the cursor
◄► button to enable or disable automatic power On when
AC power is supplied.
Fan Speed
Press the cursor
◄► button to toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humid-
ity, or high
altitude areas.
Lamp Mode
Press the cursor
◄► button to select the lamp mode for higher brightness or
lower brightness to save lamp life.
Advanced
Press
(Enter) /
► to enter the Advanced menu. See Advanced Feature on
Factory Reset
Press
(Enter) /
► to reset all items to factory preset values.
Status
Press
(Enter) /
► to enter the Status menu. See page 34 for more
information on Status.
– 29 –