Philips DVDR75/021 - Manual (Page 37)

31
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
appears.
4
Select ' A ' symbol with D or C .
Language
Audio Language English
Recording audio Language 1
Subtitle English
Menu English
Country Other
5
Select line 'Language' with CH- B or CH+ A . and confirm with
the C button.
6
Select line 'Recording audio' and confirm with C .
7
Select 'Language 1' or 'Language 2' with CH- B or CH+ A and
confirm with OK .
8
To end, press SYSTEM-MENU .
Setting the time and date
If the display shows an incorrect time or '--:--', the time and date must be reset manually.
If a TV channel which transmits TXT/PDC (teletext/PDC) is stored under programme number
'P01', the time and date will automatically be taken from the TXT/PDC information.
1
Press SYSTEM-MENU on the remote control. The menu bar
appears.
2
Select ' A ' symbol with D or C .
3
Select 'Installation' using CH- B or CH+ A and confirm with C .
4
Select 'Time/Date' using CH- B or CH+ A and confirm with C .
Installation
Time/Date
Time 20:00
Year 2003
Month 01
Date 01
To exit press
SYSTEM MENU
5
Check if the time in 'Time' is correct. If required, change the time
with the number buttons 0..9 on your remote control.
6
Check 'Year', 'Month' and 'Date' in the same way. To move between
the fields, use CH-
B or CH+ A .
7
Check the displayed settings and confirm with OK .
'Stored' will appear briefly on the screen.
8
To end, press SYSTEM-MENU .
ENGLISH
Installing your DVD recorder