Palm ETHERNET HUB - Manual (Page 10)

7
Installation
Installing the Hub
The site where you install the hub may greatly affect
its performance. When installing, consider the
following pointers:
Install the hub in a fairly cool and dry place, for
the acceptable temperature and humidity operating
ranges.
Install the hub in a site free from strong
electromagnetic field generators (such as motors),
vibration, dust, and direct exposure to sunlight.
Leave at least 10 cm of space at the front and rear of
the hub for ventilation.
Install the hub on a sturdy, level surface that can
support its weight. When installing the hub on a
level surface, attach the rubber feet to the bottom of
each device. The rubber feet cushion the hub and
protect the hub case from scratches.
Connecting the Power Adapter
Power is supplied to the Ethernet Hub through an AC
power adapter.