Peavey PCX-V12 - Manual (Page 15)

4. When the microphone is not in use make sure
to turn it off to extend the battery life. Remove
the battery from the battery compartment if the
microphone will not be in use for a long period
of time. If a rechargeable battery is used take
it out for a recharge as necessary.
BELT PACK TRANSMITTER
1. Unit Features and Functions
1.
4-pin Jack Input Connector:
Connects to the
Peavey Pro Comm 4-pin connector. Allow 5
different input configurations (See the five
ways of connection on an AF input connection,
page 19.)
2. Transmitting Antenna:
1/4 wavelength
transmitting antenna
3. GT/MT
Switch:
Switch
to the GT
position for
electric guitar
use ONLY. Gain
Control is
irrelevant for
“GT” mode.
Switch to the
“MT” position
for condenser
microphone,
wired micro-
phone or
Line-in use.
Gain Control
works in the “MT” mode for input sensitivity
adjustments.
15
1
7
2
3
4
5
6
Figure 11