Panasonic 2001 - Manual (Page 16)

Connecting the components
16
Connecting the components
Before you begin
Connecting the components of the phone
1. Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2. Connect one end of the CAT-5 line cable to the LAN Ethernet port
located on the back of the telephone (identified with a LAN icon).
Plug the other end of the CAT-5 line cable into the IP network.
3. Contact your installation technician for the proper power option.
This telephone can be powered by an AC adapter or over a LAN.
4. Thread the cord around the strain relief, retaining hook, and channel
provided for a secure power connection.
5. Secure the telephone footstand to the telephone base.
CAUTION
Damage to equipment
Do not plug the IP Phone 2001 into a
regular telephone jack. This results in
severe damage to the IP Phone. Consult
your system administrator to ensure that
you plug your telephone into a 10/
100BaseT Ethernet jack.