Polycom KIRK 7010 - Manual (Page 56)

Polycom, Inc. 57
Polycom Kirk 7010-7020-7040 User Guide Settings
4 Scroll to Settings and press Change.
5 Scroll to the desired alert and press Select.
Bluetooth (only KIRK 7040)
Bluetooth allows you to connect the handset to a compatible device with
bluetooth connectivity within 10 metres (32 feet). When a wireless headset is
connected to the KIRK 7040, it is possible to disconnect the headset from the
handset (12.10.5), to connect the headset to the handset again (12.10.6), to
remove the headset from the device list (12.10.7), to connect automatically to
the handset (12.10.8), to adjust the headset volume (12.10.9), to switch the audio
between the headset and the handset (12.10.10), and finally it is possible to
redial the last number entered in the handset (12.10.11).
Activate Bluetooth Function
To use the bluetooth function, you must activate the bluetooth function.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Bluetooth and press Select.
4 Scroll to Active and press Select.
5 Scroll to On and press Select. The Bluetooth function is now activated.
Pair Wireless Headset with the Handset
When setting up a bluetooth connection, you will need to search for a
compatible device with bluetooth connectivity in order to pair this device to
your handset. You will need a pin code of 1-16 numeric characters. (Consult the
user guide of the Bluetooth headset for the pin code information). You are only
asked to enter this pin code the first time you connect to the device.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Bluetooth and press Select.
4 Scroll to Search to search for compatible bluetooth headset and press
Select
.
5 Select the headset code number listed in the display of the handset and
press Stop, then press Add
.
6 Enter pin code and press Ok.
7 Press Ok , and press Options in order to connect to the headset.
8 Scroll to Connect and press Select.