Palsonic 3498 - Manual (Page 8)

Press STAND BY button, the appliance is set to stand by mode, the power indicator
is lightened.
Press STAND BY button again, the appliance is turned on and the indicator is turned off.
7
AM 6 : 00
Press the PICTURE CONTROL button on the Remote Control Unit.
The FUNCTION to be adjusted is selected in sequence as shown in the following
chart at every press of the button.
CONTRAST
Adjust the button to obtain satisfactory picture.
ON SCREEN
DISPLAY Press button Press button
Colour COLOUR Pale Deep
Brightness BRIGHTNESS Dark Light
FUNCTION
BRIGHTNESS
COLOUR
Contrast CONTRAST
CAPTION
DISPLAY
Weak Strong
PICTURE CONTROL (REMOTE CONTROL UNIT)
CALL BUTTON (REMOTE CONTROL UNIT)
Press this button, the present channel number will be displayed on the screen. If the
electronic clock is in operation, the channel and time will be displayed together at the
upper right corner of the screen.
Press the button again to cancel display.
8
STAND BY BUTTON
.
Red Block Moves
.
.
.