PYLE Audio SOUNDPOINT IP 33X - Manual (Page 53)

Using the Basic Features of Your SoundPoint IP 32x/33x Phone
3 - 7
2. Press to access the new call.
Soft key labels are updated on the display showing Ignore, Answer, and
Reject.
3. Answer the incoming call.
This places the original call on hold and refreshes the soft key labels.
To answer an incoming call on a line configured for multiple Line Keys:
¾ Do one of the following steps:
— Answer the call by pressing or associated
with the second incoming call.
The first call is put on hold and the second call is answered.
— Press to put the original call on hold.
Soft key labels are updated on the display showing Ignore, Answer,
and Reject.
Answer the incoming call.
This places the original call on hold and refreshes the soft key labels.
Answering a call on shared line is no different than on private line, except that
there is no Reject soft key and another person on the shared line might answer
the call.
Ending a Call
To end a call:
¾ Do one of the following steps:
— Press the EndCall soft key.
— Replace the handset.
— Press
if in Hands-free Speakerphone Mode, or if in
Headset Mode.
Note Use this procedure after the call prompt disappears. The call waiting prompt
interrupts the active call for 10 seconds, where the incoming call can be
immediately dealt with.