Panduit PVMAPU246GK - Manual (Page 2)

E-mail:
[email protected]
Fax:
(708) 444-6993
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
INSTALLATION INSTRUCTIONS PN343C
Page 2 of 2
Label † / Label Cover Installation & Removal - (screwdriver required)
1. 2.
3. 4.
Label †
Label Cover
Label Part #
UILJ4 5 sheets
Computer Printable Labels
Height Length Color Std. Pkg. Qty.
.236” 2.585” White
Non-Adhesive Label Cassette (for use with P AN A CEA LS7 Thermal Transfer Printer)
*UILS7BW 1/4” 26.2’ Black / White 1
U LTIMATE ID Label Part Numbers
* See PANDUIT LS7 Operations Manual to explain serialized function for label printing and page
function for non-serialized label printing.
† Write on labels are not included with these Patch Panels per TIA/EIA-606-A standard which states: “To maximize legibility, all labels
shall be printed or generated by a mechanical device, and shall not be written by hand.” (Refer to table below for label products)
All cables should flow directly into vertical cable managers
on the corresponding side of the Angled Panel.
Recommended cable routing for terminated modules. Recommended cable routing for patch cords.