Planar PL190M - Manual (Page 12)

H-OSD POSITION Moves the OSD position on the screen to the right or left. Select H-
OSD POSITION using [+] or [ − ] button, then press [Menu] button to activate the function.
Press the [+] button to move the OSD position to the right, [ − ] button to move left. Then Press
[Menu] to return to MISC Sub-Menu after adjustment.
V-OSD POSITION Moves the OSD position on the screen up or down. Select V-OSD
POSITION using [+] or [ − ] button, then press [Menu] button to activate the function. Press the
[+] button to move the OSD position up, [ − ] button to move down. Then Press [Menu] to return
to MISC Sub-Menu after adjustment.
SMOOTHING Adjusts the displayed texts to be smoother. Select SMOOTHING using
[+] or [ − ] button, then press [Menu] button to activate the function. Press [+] or [ − ] button and
adjust to your liking shown below. Press [Menu] button to return to MISC Sub-Menu.
INVISIBLE Activates the OSD background to be invisible. Select INVISIBLE using the
[+] or [ − ] button, then press [Menu] button to select either On or Off option. Press the [+] or [ − ]
button to return to the MISC Sub-Menu.
INFORMATION
D isplays the timing mode (video signal input) coming from the
graphics card in the computer. Select INFORMATION using the [+] or [ − ] button, then press
[Menu] to display the mode shown below. Then press [Menu] button to exit OSD or go to
MISC to return to MISC Sub-Menu.
RECALL
R eturns the adjustments back to the factory settings if the monitor is not
operating at its original factory settings. Select RECALL using the [+] or [ − ] button, then press
[Menu] button to reset the settings.
EXIT Turns off the OSD. Select EXIT using the [+] or [ − ] button, then press [Menu] to exit
the OSD.
11