Planet Technology ICA-106 - Manual (Page 29)

Network
:
Configure Network setting such as DHCP On/Off, DDNS and UPnP
IP Setting:
- DHCP: DHCP: Stands for Dynamic Host Configuration Protocol.
The Network Camera will be assigned an IP address and related information by
DHCP server while “DHCP ON”. Otherwise, user needs to specify IP address
and related information to the Network Camera manually.
- IP address, Subnet mask, Default gateway, Primary DNS, Secondary DNS:
If turns DHCP OFF, then user should enter these network parameters by
manual.
Note: Network Camera will reboot automatically make this setting to take effect.
29/60