Philips CEM250 - Manual (Page 19)

20
Sticked it onto the dashboard. •
Or clip it on the sun-shield. •
Voice dialing
You can dial a number by voice if your mobile
phone supports voice dialing.
1
Press for 3 seconds.
» [VOIC DIAL] is displayed.
2
Speak a name stored in contact list stored
in the phone.
The unit repeats the number and calls
»
out.
» [NO MATCH] is displayed if the unit
does not recognize a number.
Make a call
1
Press SOURCE repeatedly to select [BT
MUSIC].
2
Press .
3
Press or to select from the following
list:
•
[DIAL NUM]: dial a number directly
• [DIALLED]: dialled number
• [MISSED]: missed call
• [RECEIVED]: received call
• [ME PBK]: Phone directory
• [SIM PBK]: SIM card directory
4
Press to confi rm the selection.
5 Use bluetooth
devices
With this car audio system, you can listen
to audio fi les from a player or make a call
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
1
Turn on bluetooth function on the device.
2
Setup bluetooth fuction on your device.
3
Select “CEM250” in the pairing list.
4
Enter default password “0000”.
“
» [CONNECT]” is displayed on the
panel if pairing succeeds.
Tip
If the paired device is moved beyond the •
operational range, when it is brought back,
please check if the device is still connected
with the system:
. If they are connected,
• [Disconnect] (red icon)
is displayed.
. If connection is lost,
• [Connect] (green icon) is
displayed. Follow the instruction above to pair
the device with the system again.
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone at
a location close to mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
“Connect wires” section).
2
Place the microphone at a proper
location. For example,
EN