Pioneer VSX-1016TXV-K - Manual (Page 34)

The System Setup menu 07
34
En
Manual MCACC setup
You can use the settings in the Manual MCACC setup
menu to make detailed adjustments when you’re more
familiar with the system. Before making these settings,
you should have already completed
Automatically setting
up for surround sound (MCACC) on page 8.
You only need to make these settings once (unless you
change the placement of your current speaker system or
add new speakers).
Important
• For some of the settings below, you’ll have to connect
the setup microphone to the front panel and place it
about ear level at your normal listening position. See
Automatically setting up for surround sound (MCACC)
on page 8 if you’re unsure how to do this. Also see
Problems when using the Auto MCACC Setup on
page 10 for notes regarding background noise and
other possible interference.
• If you’re using a subwoofer, switch it on and turn up
the volume as necessary.
Caution
• The test tones used in the MCACC setup are output
at high volume.
1 Select ‘Manual MCACC’ from the System Setup
menu.
See Making receiver settings from the System Setup menu
above if you’re not already at this screen.
2 Select the setting you want to adjust.
If you’re doing this for the first time, you might want to
make these settings in order.
• Fine Ch Level – Make fine adjustments to the overall
balance of your speaker system (see Fine Channel
Level below).
• Fine SP Distance – Make precise delay settings for
your speaker system (see Fine Speaker Distance on
page 35).
The last five settings are specifically for customizing the
parameters explained in
Acoustic Calibration EQ below:
• EQ Auto Setting – Measure the acoustic
characteristics of your room and automatically
adjust the frequency balance of your speaker system
(see
Setting the Acoustic Calibration EQ automatically
below).
• EQ Data Copy – Copy Acoustic Calibration EQ
settings for manual adjustment (see Copying your
Acoustic Calibration EQ settings on page 36).
• EQ CUSTOM1/2 Adjust – Make detailed manual
adjustments to your custom Acoustic Calibration EQ
settings (see
Setting the Acoustic Calibration EQ
manually on page 36).
• EQ Data Check – Check the ALL CH ADJUST ,
FRONT ALIGN and custom settings using the on-
screen display (see Checking your Acoustic
Calibration EQ settings on page 36).
Fine Channel Level
• Default setting: 0.0dB (all channels)
You can achieve better surround sound by properly
adjusting the overall balance of your speaker system. The
following setting can help you make detailed
adjustments that you may not achieve using the
Manual
speaker setup on page 37.
1 Select ‘Fine Ch Level’ from the Manual MCACC
setup menu.
After the volume increases to the reference level, test
tones will be output.
2 Select each channel in turn and adjust the levels
( +/– 10 dB ) as necessary.
Use / to adjust the volume of the speaker you
selected to match the reference speaker.
• The level of the left channel (the primary reference
speaker) is fixed at 0.0dB so that you’ll have plenty of
room to adjust the other speaker levels.
When it sounds like both tones are the same volume,
press
ENTER to confirm and continue to the next
channel.
• For comparison purposes, the reference speaker will
change depending on which speaker you select.
• If you want to go back and adjust a channel, simply
use
/
to select it.
3 When you're finished, press RETURN.
You return to the Manual MCACC setup menu.
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
3.Manual MCACC
:Return
a.Fine Ch Level
b.Fine SP Distance
c.EQ Auto Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
3.Manual MCACC
:Return
a.Fine Ch Level
b.Fine SP Distance
c.EQ Auto Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
3a.Fine Channel Level
Please Wait... 20
Caution!
Loud test tones
will be output.
:Cancel
3a.Fine Channel Level
L + 0.0dB (Reference)
R [ 0.0dB ]
C + 1.0dB
SL [ -3.0dB ]
SR [+ 10.0dB ]
SBL [– 10.0dB ]
SBR [+ 9.5dB ]
SW [– 1.5dB ]
:Finish
VSX-1016TXV_KU.book.fm 34 ページ ２００６年３月２４日 金曜日 午後９時１９分