Premier Mounts 9533-004-001-07 - Manual (Page 5)

PRC
Installation Manual Page 5
AST-2446 Installation
If the AST-2446 will not be used to
mount the PRC, then a suitable piece
of threaded pipe can be used. These
instructions will tell the user how to
mount an AST-2446 to the ceiling. If
a custom piece of threaded pipe is
used, it is the responsibility of the
user to determine how best to mount
the PRC and pipe.
Single Stud Installation – Wood screws
(Commercially Available)
Solid Surface Installation – Concrete wedge
anchors (Commercially Available)
1. Secure the ceiling plate to the ceiling
structure.
2. Use suitable hardware (commercially
available) depending on your installation
environment to secure the two (2, or 4,
depending on the structure) mounting
points found on the ceiling plate to the
ceiling structure.
Four Outer Points
are for Solid Surface
Installation
Two Inner Points
are for Single Stud
Installation
3. To adjust the height of the AST-2446,
remove the adjustment screws (Page 4),
determine the desired height, and re-insert
the adjustment screws to lock the AST-2446
into the desired position.
Ceiling Surface
Ceiling Plate
Mounting
Hardware